Tag Archives: disconnects

Using Bus Ducts and Bus Plugs in Manufacturing

When it comes to the electrical power distribution, a bus duct usually behaves inside a switchboard, dissemination board, and substation. These are normally utilized as a part of the business and industrial setting for inside and outside the establishment. The installation of bus plugs and bus ducts needs to be handled by experts to ensure that the high voltage manufacturing equipment runs on can be handled. A little numbness or wrong installation may bring about instant demise to the safety of the workers running the machinery. Below you will find some basic tips which can truly help guide you through the process of having bus ducts installed within your work environment.

In numerous industries and business offices, bus ducts are introduced in the downstream of the transformer which safeguards them from fault. It is important to remember that where you put the bus plugs and bus ducts must be completely sheltered and secure. You have to protect the equipment from rust and some other unsafe substance.

Bus plugs are basically an electrical attachment similar to an electrical outlet that you would see around your home.  The difference is that in manufacturing these systems need to move about to provide electricity to equipment in different areas of the building at different times.  Each bus plug will be associated with a specific area of bus ducts.  This bolsters power down to whatever it is beneath that should be powered, from lighting frameworks to hardware, whatever the case might be. The colossal advantage of the bus plugs are their ease of adaptability. Since there is no corporal hard cabling to the building, the whole framework can be detached and adjusted to accommodate the arrangement of floor. As new gear comes on the web or plant layouts moved, there’s no doubt about how precisely power will be hurry to the new area.

Utilize stainless steel bus ducts and rust proof equipment to increase the safety of bus ducts installed within the establishment.  Utilizing stainless bus duct and rust proof equipment helps to guarantee safety to the workers, the equipment, and the facility on a whole.

Bus ducts should never be settled permanently on the wall.  Bus ducts require attention to this matter.  If left to settle on a wall or floor the apparatus may not function as it should causing inconveniences to the work environment.  It is important that the quality of the products you use to power your machinery matches the quality of the equipment.  Never compromise on quality materials when installing bus ducts and bus plugs.  It is a huge mistake that often occurs in manufacturing facilities; keep this in mind when choosing what to install and what equipment to use within your facility.

At all times professional assistance should be given to the installation and usage of these systems. The fittings are not as stress-free as you may think; nothing is superior to professional help that is highly knowledgeable in this particular field and guarantee the security of work environment.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists call 877.844.5514 today.

Why Buying Refurbished Electrical Equipment Is a Plus

A number of different types of refurbished electrical equipment are available to our consumers.  Breakers, fuses, panel switches, transformers, and so much more are stored in one of our two warehouses awaiting for purchase.  Our website can be accessed anytime to view a variety of other product categories and more specific products and prices available to best meet your project needs and budget.

The fact of the matter is that many people can benefit from purchasing refurbished electrical equipment rather than buying a brand new product.  “Refurbished” is just a term used to describe a product that has been previously sold and returned by the consumer for resale.  There has been great satisfaction in those who purchase refurbished electrical equipment because it saves the consumer a great deal of money.  By choosing a refurbished product, the consumer gets the best for a fraction of the cost of what they would have paid had they purchased the item brand new.

It is also important for consumers to understand that buying a refurbished product does not mean that they are buying a cheaply made item.  Refurbished electrical equipment is carefully inspected to ensure that the product is working properly in order to meet the consumers needs.  The individuals who refurbish these products are highly trained individuals who have a high standard of work procedures and protocols in the process of refurbishing items.  Strict quality guidelines are followed to deliver these top-notch refurbished electrical equipment.

Our company’s products are carefully examined.  A typical electrical product has a certain process that it has to go through to ensure quality.  The parts and stripped down and every aspect of the part is checked over.  Any malfunctioning parts within the product are replaced with new parts.  Our experts go through every piece on each product to correct any imperfections and make the product a quality piece that can be sold to consumers.  When each product is corrected and reassembled, the product undergoes specific diagnostic testing to ensure that the product is working properly and meets the adequate standards.

Just because we supply refurbished products does not mean that we have purchased and refurbished cheaply made products to begin with.  Our company wants to be sure that you get the best, which is why we purchase high end brand products and efficient models to refurbish and resell.  If our company doesn’t like cheaply made products, then why would we sell cheaply made products to our consumers?  We work effectively to ensure that our products are refurbished to meet the consumers product needs and their budget.

In addition, when purchasing a refurbished product many consumers find it beneficial to have a product backed by a warranty.  Our company offers a one year warranty on all of our products, so if you run into any unforeseen complications, we will have you covered.  There is nothing more frustrating that purchases a refurbished product that isn’t under warranty and then you end up dishing out more money; with our company we can ensure quality products backed by a warranty.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists call 877.844.5514 today.

 

 

 

All About Circuit Breakers

How does a circuit breaker work?  What exactly shuts the breaker off to prevent the electrical flow from overheating?  Overheating is known as tripping the circuit.  It is crucial that in residential or industrial settings that the connection is tripped.  A circuit breaker does just that.  It shuts off the flow of electricity to the circuit’s thus causing break in the current of electricity.  Instead of ignoring the issue by flipping the switch and resetting the breaker it is crucial that you find the reason the circuit keeps tripping in the first place.

There are three main reasons that a circuit is tripped:

  • An overload on the circuit
  • A short within the circuit
  • A ground fault

No matter if you are a commercial or industrial user it is important to learn what causes a circuit to trip and how to repair it.  This will allow you to save time and money in the long run.

A circuit that is overloaded remains the most common issue of a tripped breaker.  It is pretty simple actually; an overloaded circuit happens when too many things are plugged in at one time.  Even if it is many different outlets, if they are all on the same circuit it will trip.  Consider this, if a circuit has 15 amps but 20 amps of electricity are all plugged in to the same circuit then it will shut off. This helps to prevent overheating. The more current that flows through the circuit over what it is made to carry will prevent the circuit from overheating and will instead trip the breaker.

In order to prevent this it is crucial that the power is redistributed.  Items that require a lot of power should not all be plugged in on one circuit.  Heaters, irons, hair dryers, and more should not be all on one circuit. If all of these appliances must be used on one circuit then it is important to hire a professional to run a new circuit.

Another reason for an overheated circuit can be an overheating appliance. In the summer, overheating central air conditioners are notorious for this – when overheated, they pull in more amps than normal, causing the entire circuit to overload.

A short circuit offers a bit more to be concerned about. A short means that a hot wire is touching another hot wire or neutral wire.  When this occurs an abundance of current is allowed to flow through and creates more heat than the circuit was cut out for.  This allows it to shut off.  The smell of burning or discoloration at the outlet means that you have a short circuit.  Immediately turn off the power at the outlet and have a professional electrician out to replace it.

A ground fault is even more serious than an overloaded circuit as it is a short circuit where a hot wire touches a ground wire or the wall of a metal outlet box.  The identifiers are the same as a short circuit, the smell and the discoloration.  Don’t attempt to fix this yourself.  Circuit breakers are important as they are a safety device that allows a circuit to be broken before a problem occurs.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists call 877.844.5514 today.

 

 

 

Save Money Using Reconditioned Electrical Components

If you are looking for a real way to cut costs and save money during electrical projects consider using busway and bust ducts that are used and reconditioned.  A great advantage in using bus bars or bus ducts in electrical components is that you are able to achieve more flexible power distribution.  They are also beneficial because they are able to carry and regulate large currents of electricity.

Copper, plated aluminum and steel are the most common materials in which electrical busway and bus duct components are crafted out of.  In order to run large scale electrical equipment in several areas within an industrial setting and to remain cost effective busways, bus ducts and bus plugs are employed.  In both manufacturing and industrial settings the machines require a lot of electricity.

Normal electrical outlets do not carry enough electricity to power these large machines.  When the electrical need changes normal outlets do not cut it.  In order to manage the large supply of electricity these systems are put into place and are able to be changed in and out as needed.  If more electricity is needed, more is added.  If less is needed, it is taken away and added to another area where it will be useful.

To save money many companies turn to reconditioned or refurbished bus plugs, bus ducts and busway electrical components.  This can noticeably lessen the expense of any project.  The question that is often asked is if reconditioned electrical components are as reliable as new ones.  The answer to that is simple, yes.  Refurbished electrical components are completely repurposed so that you can enjoy the same benefits using them as you would new ones.

New products are more expensive because of the cost of the initial raw materials that are needed to create them.  To be cost effective parts are refurbished and sold at only a fraction of the cost of new products.  Repurposed electrical components are just as good as new ones.  They are also environmentally friendly and allow you to allocate funds within your electrical budget elsewhere.

No matter what you choose new or refurbished products choose a company that sells a variety of electrical components to choose from.  Whether you need to repair a new or obsolete piece of equipment they should have what you need in stock.  The last thing you need is downtime when you are trying to run a business.  Consider using refurbished bus ducts, bus plugs and busway electrical components when you are in the midst of a new project or need replacement parts to keep your company running smoothly.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

Understanding Electrical Components Used In Industrial Settings

Without working every day with electrical components most people remain clueless about what the function of each individual product is.  Industrial settings are the most common situation which you would run in to needing to know about all of the different functions of electrical products.  Below you will find detailed.

Resistors

The most common component to every circuit you will come in contact with is a resistor.  A resistor is a small part that is used to create electrical resistance within the circuit.  The resistor allows a specific amount of resistance within the electronic circuit.  This element of the circuit controls the flow of current and lowers the voltage that flows through.  Without the use of resistors the electrical products that we use today would not be functional or safe.  The resistor’s qualities make it essential for the usefulness of electrical products.

Capacitors

The second most common component after the resistor is a capacitor.  The capacitor is used to store electrical charges temporarily offering a great value to the efficiency of all the products for which it is used.

When considering how a capacitor works think of it as a battery.  The difference is that a capacitor does not create electrons it only stores them.  There are a variety of capacitors including the following:

Air which is usually a capacitor used in radio tuning circuits.

Commonly used for circuits in which a timer is required, Mylar is used in clocks, an alarms or counters.

A terrific capacitor in high voltage applications is glass.

Used as a capacitor in high frequency applications such as antennas, x-rays and MRI machines is ceramic.

Diodes

A diode is a component that allows the electrical current to flow in one single direction. The device has two ends known as anode and cathode.  The diode only works when the current flows through and the positive voltage is utilized.

Transistors

Transistors are used to control the electrical voltage.  They help electricity flow between the two ends and allow electrical devices to keep functioning properly.  Transistors are popular with people as it is incredibly useful when needing to control the electrical voltage that is being sent.

Several electronic components work together in the creation of electronic boards including capacitors, resistors, diodes and transistors.  Other integrated boards use these components as well.  It is crucial that detailed information is gone through before reaching out to distributors.  Without digging through individual details of each component and understanding the value of each sector on its own as well as when used together you would find yourself with so many wholesale electronic component distributors.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

Save Money With Reconditioned Electrical Components

All business owners are looking to cut costs while maintaining or improving service.  This is the battle of all businesses big or small.  The less you spend the more you profit and with profits come the ability to grow.  One way that businesses attempt to cut costs is in purchasing electrical components for their operations.  Reconditioned circuit breakers, transformers, bus ducts and plugs are just a few of the components that can be utilized to save money.

One of the things to look for when choosing an electrical company to purchase from is finding a company that works with not only reconditioned but new, used and obsolete components.  It is crucial to be able to find replacement parts for the equipment in your plant when they are needed.   Having to wait to locate components means down time for the machines that keep your manufacturing facility running which in turn means a loss of money for your business.

When purchasing reconditioned or refurbished electrical products such as circuit breakers it is important that they have been properly tested.  Only do business with suppliers who sell quality reconditioned electrical distribution products.  They should operate under strict quality guidelines.

Reconditioned products should be completely disassembled with each piece being meticulously cleaned and inspected.  Refurbished products should then painted, reassembled and tested to ensure that they meet or exceed manufacturing UL standards.  It is also important to find a company willing to stand behind their new, used and reconditioned products with at least a one year warranty in place.

When possible, before you purchase the industrial electrical component your business needs to replace talk to a customer service representative.  With their assistance you will be able to find out a great deal about the reconditioning process their products have to go through before being sold.

It is important that the company you choose to work with is a supplier of a wide variety of electrical products.  Find a company that works with all of the major manufacturers.  This will make it easier on you when looking for replacement parts for more than one piece of equipment.

One stop shopping for new, used and obsolete electrical components is crucial.  When one piece of equipment is down it affects the entire manufacturing flow.  Having one place to go that can meet all of your needs for bus plugs, ducts, transformers, circuit breakers and more can mean all the difference in getting you back up and running fast.

J&P Electrical is a full service electrical equipment company. At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

Understanding Electrical Components

Electrical equipment is a broad phrase used in the industry.  The phrase is used to define machines that gain power from electricity.   An entire set is created from a power switch, many various electrical components and an enclosure.  Small parts such as switchboards, distribution boards and circuit breakers all work together to run each piece of electrical equipment.  When we better understand the component used to create various electrical elements within our home or business we are better able to protect them.

Anything that requires electricity to run has the potential to burn out at any time.  No one can guarantee that an electrical machines run time. The longevity of your equipment is dependent on the components that are working together to run your machine.    One thing that can help to increase the life expectancy of electrical equipment is to install it properly.  The directions that are sent with the product from a residential stove to a commercial fabricator are sent to protect your purchase.  Improper installation is the number one cause for electrical equipment failure.

If issues arise with one piece of equipment in particular be sure that you not only look at the piece of equipment to find fault but also the electrical circuit in which the piece is a part of.  It is possible that nothing in fact is wrong with the machine itself but in the circuit in which it is plugged.  This is a serious issue both in commercial and residential applications.  When the wiring is not appropriate for the equipment potential hazards become a viable threat such as electrical fires.

Often times when a piece of equipment fails abruptly there is a simple explanation.  Blown fuses from overloaded circuits tend to be a fairly common cause of equipment failure.  Check the circuit breaker to see if this may be the reason for your issues.  If the circuit breaker is not blown check to see if the equipment you are using as fuses that are directly installed to help with the internal circuit of the product.  The simplest examples of internal fuses within electrical circuits are seen in automobiles or even Christmas lights.  The product contains fuses for the protection of the internal circuit as well as the residential or commercial circuit that runs the electricity for the entire building.

With proper installation understanding circuit breakers there is a good chance the next time a piece of equipment fails you will be able to troubleshoot it on your own without having to call in help.

J&P Electrical is a full service electrical equipment company. At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

Understanding Bus Ducts and Bus Plugs

When it comes to electrical equipment many of us non-electricians have no idea what a product is or what it does for us.  Electrical components are a mystery.  The mystery doesn’t ever come into question until an issue within the power system occurs and we non-electricians are left scrambling over what needs to be done.  That is why we have decided over the next few months to give a brief overview into all the different areas within the electrical equipment industry, starting today with bus plug and duct systems.

In order to understand the basic purpose of bus plug and duct systems you need to know about how power can be delivered.  In most buildings we are familiar with such as most commercial and residential settings power is sent through hard wires within the walls of the building.  We gain access to the electricity through power outlets.  It is pretty simple concept to understand.

This is not so true when looking at the electrical distribution needed within a manufacturing plant or other industrial settings.  In facilities that operate with an open floor plan you will have a variety of machines throughout the building.  Many times the machines need to be able to move to other areas within the facility to allow for other pieces of machinery to be used.  Take for instance a fabricating plant.  The same space on the floor will be used for a variety of tasks that need to be accomplished with a piece.

For power to be run to different areas of the facility while being able to accommodate different sized pieces of equipment bus duct and plugs are used. This allows the most freedom with plant layout and alleviates the need for stationary power supplies.  In order to achieve power throughout the open floor plan ducts are installed throughout the facilities ceiling area.

Bus ducts can be ran wherever power is needed and are simple enough to add to if needed in the future.  The power is transferred from the bus duct using a giant industrial electrical plug called a bus plug.  Each bus plug connects to the overhead bus duct feeding electricity where it is needed.  Bus duct and plug systems can be used for anything from overhead lighting to heavy machinery.

This system allows for flexibility in manufacturing.  It allows large industrial plants the ability to change the amount of power, electricity, to different areas within a large open space.  With this type of system there is no need to hard wiring so as the plant grows or equipment needs increase the power system can change and grow with the need.

That is really all there is to bus ducts and plugs.  For options in new, reconditioned or obsolete bus plugs are sure to check for an electrical equipment distributor online today.

J&P Electrical is a full service electrical equipment company. At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

 

Factors When Choosing An Electrical Circuit Breaker

Every home and business has an electrical circuit breaker.  Many of us have no idea what the circuit breaker really does or how it works.  A breaker is a unit that is installed that protects your circuits from becoming overloaded essentially causing a short which could create an unsafe situation.  By design, when the breaker becomes aware of a disruption in the system it breaks the electrical current flow thus protecting the rest of the circuit.

Commercial and residential electrical circuit breakers are purchased based on a number of essential factors including the vast abundance of different designs that they are sold in.  Other factors to weigh before you buy a circuit breaker include the voltage load, the mounting style and the unit’s trip style.

Voltage Load

This is a fairly obvious feature to figure out.  Commercial and industrial settings need higher voltage circuit breakers then a residential environment.  This is because of the amount of electricity that will be flowing through the circuit.  Larger equipment requires a higher amount of electricity therefore requiring a higher voltage breaker.  It is crucial when buying or selling circuit breakers that you understand what purpose the breaker is serving.  Installing a circuit that is either too big or too small can end up being detrimental.

Low Voltage Circuit Breakers: Consider this style of breaker for most residential applications.  This circuit takes a load up to 1000 volts without issue.

Medium Voltage Circuit Breakers: Consider this style breaker for commercial office buildings or residential uses when using high voltage tools.  A home wood working shop is the perfect example of a residential environment that needs more than a low voltage circuit.  A medium voltage breaker is good for circuits between 1000 to 72,000 volts.

High Voltage Circuit Breakers:  For any use that requires more than 72,000 amps of voltage this is the breaker you need.  This is what is needed for industrial and commercial applications that use large pieces of equipment for manufacturing.

Mounting Style

The manner in which a circuit breaker is mounted is also another consideration for which purchasers choose the correct mechanism for their need.  Two main styles include fixed mounting and removable mounting.  Draw out mounted breakers are used for medium voltage breakers.  Bolt on and plug in electrical circuit breakers are also options that can be obtained from companies that sell electrical equipment and supplies.

Trip Unit Type

When you are purchasing a circuit breaker you need to also take into consideration the unit’s trip type.  There are a few main types including magnetic, thermal, thermal magnetic and magnetic hydraulic trip units.  Another consideration is the temperature operating range in which the circuit breaker operates.  You want to purchase a breaker that operates at different temperature ranges.

It is important to take into consideration all of the essentials pieces of purchasing a circuit breaker before installing one in your home or business.  The electrical component will prevent accidental electrical issues from occurring down the road.  Overworking a circuit can cause shortages that will cause fuses to continually blow. This is only one disruption that can occur if a circuit is overloaded.

J&P Electrical is a full service electrical equipment company. At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.