Tag Archives: Refurbished Fuses

Understanding Residential and Commercial Electrical Components

One mystery that stumps many of us is the usage of fuses in electrical components residentially and commercially.  Most of the confusion surrounds the voltage, Watts, ratings and labels.  Below we will look at fuses in greater detail to offer guidelines on working out the correct fuse for every situation.

What is a Fuse?

Fuses are used in electrical appliance, automobiles, homes and businesses.  They are designed to prevent a flow of current that is higher than the value of the fuse.  One example of this is if you choose a 3A fuse; any current flow exceeding 3A will cause a surge and the fuse will “blow”.  The fuse keeps too much electricity from flowing into the equipment which would result in some type of failure such as a fire or explosion.

Any excess in current flowing through a circuit is prevented from going any further with the use of fuses.  The main purpose of fuses is to prevent melting or fire from occurring under fault conditions.  A fault condition is where a higher current value attempts to move through and the fuse disallows any extra current from flowing through.

The fuses value is dependent upon the power needed to allow the equipment to run properly.  An appliance, such as a heater, is higher powered, requiring more current and thus larger fuses with a cable that is capable of carrying it.

Molded Main Plugs

Sometimes, as within molded main plugs, the cable is molded to the plug.  The fuse is fitted within the molded plug. The fuse value is marked on the outside of the plug which makes checking the fuse very easy.  In order to check out the fuse you lever it out and check to ensure the value is the same as what is marked on the plug.

Rewireable Main Plugs

Rewireable main plugs are ones in which the user can wire on their own.  These plugs can handle a variety of currents and are marked to represent this.  Even if a cable says it can handle a 13A fuse does not mean it should be used on your appliance.  Make sure the fuse you choose matches the appliances maximum voltage not that of the cable.

Watts Verse Fuse Ratings

There is a simple calculation to determine the current amps taken by an appliance.  Divide the power in watts by the mains voltage to work out the needed amps.  For example, a 1900 watt divided by 230 voltages is equivalent to an 8.3 amp rating.  This allows you to decide between a 3A, 5A or 13A fuse.  You can obviously see that 3A and 5A will be too small for an 8.3A rating. You will need to choose a larger fuse such as a 13A.

To choose a cable with enough capacity to carry the current check the diameter of the cable.  A cable of 7.5mm or more is likely to be rated for 13A or greater.  Be careful to note that a 3A or 5A fuse should not be changed just because the cables rating is 13A however a 13A fuse should only be paired with a 13A cable not a lower rated cable.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

Understanding Fuses Within Electrical Components

There is a lot to learn about the various electrical components that are used throughout residential and commercial buildings.  Many older homes and businesses use wiring and electrical systems that require the use of fuses.  The one thing to remember when it comes to fuse systems is that you never want to use a fuse that has an amperage rating that is higher than what is specified for the system.  To test fuse continuity you will want to use a multi tester.  Take the multi tester and press one end to the center contact while the other one is pressed to the screw shell.

It is important to understand the variety of fuses available and to be able to identify them in case you ever need to replace one.  Fuses are used in automobiles, appliances, circuit breakers and a variety of other electrical components around both residential and commercial settings.

The most common type of fuse is a low voltage fuse.  You will see low voltage fuses used in many electronic appliances and entertainment gadgets.  This type of fuse is available in ratings up to twenty amperes.  A fuse of this type can signal a short circuit in the wiring system or a system overload.

Standard plug fuses are the type of fuses used most often in service panels.  Most often standard plug fuses are used to power small appliances and basic lighting fixtures.  You will find standard plug fuses in amperes ratings of fifteen, twenty and thirty.  This is dependent upon the gauge of the wire that is found in the circuit.  As with a low voltage fuse, standard plug fuses are used t signal a short in the system as well as an overloaded circuit.

Another common fuse used in residential service panels is a time delay fuse. Similar to a standard plug fuse, time delay fuses come in amperes with ratings of fifteen, twenty and thirty.  The unique quality of time delay fuses is that they can withstand a small power surge, such as a startup of a motor.  They are the fuses used to signal short circuits, circuits that are overloaded and sustained circuits.

A type-s fuse is used for powering up small light fixtures and small appliances.  There is only a slight difference between type-s fuses and the standard plug fuse is that the type-s fuse can guard against the accidental installation of a fuse that has an amperage rating to high for the circuit.  This type of fuse fits an adapter that screws into a service panel.  The adapter only fits into type-s fuses with matching amperage.

The ferrule type cartridge is used in fuse type service panels.  They are used to power major appliances and are available in ratings up to sixty amperes that suit the gauge of wire in the circuit.  The fuse can withstand a small surge, can signal a circuit that has become overloaded, a short or sustained circuit.

The last type of fuse to discuss is the knife blade cartridge fuse.  This is the type of fuse used when more than sixty amperes are needed to protect the electrical system of homes.  The knife blade cartridge fuse can withstand momentary power surges.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

Global circuit breaker & fuse market grow at a cagr of 5.2% to reach $15,100.0 million by 2018

Growing demand of electricity and power transmission activities with increasing investment in residential/non residential construction is expected to drive the Circuit breaker & fuse market. It is estimated to reach $15,100.0 million by 2018, with a CAGR of 5.2% from 2013 to 2018.

The Americas, with its thriving economies and rapidly expanding manufacturing bases, is expected to experience highest revenue growth during the next five years. Asia-Pacific is having highest CAGR of around 6.0% from 2013 to 2018.

The need to satisfy rising electricity distribution demand is expected to enhance the growth prospects of the circuit breaker & fuse market. The lucrative and high-investment areas such as Asia-Pacific and Americas are the key driving factors for the exponential growth of circuit breaker & fuse market.

Circuit breaker & fuse market in terms of volume can be depicted in terms of a million units. Here also, circuit breakers have bigger market as compared to fuses. Also there is a significant variation in the pricing of circuit breakers and fuses. Demand wise, the circuit breaker is dominating and expected to follow the same trend

Electric-power transmission is the bulk transfer of electricity, from  power plants to electrical substations. Electric power transmission and distribution (T&D) equipments have very high demand. The primary driver for increases in transmission spending is demand for the electricity grid. Circuit breaker & fuses are one of the major components of the power transmission equipments.

Top players in the circuit breaker & fuse market include Siemens AG, ABB, Schneider Electric SA, Toshiba, Alstom Grid, Mitsubishi Electric Corporation etc. with a combined share of around 59%.

For this report, the major players in the market are identified through secondary and primary research based on which, their market shares are evaluated. This includes study of the annual reports of top market players and interviews with key opinion leaders such as CEOs, Directors, and marketing people.

The size of overall market is determined by forecasting techniques based on circuit breaker & fuse demand in different regions, which is validated through primary sources. The market revenue and volume for various types of circuit breakers & fuses are determined and are evaluated using primary and secondary research. The market data is available from 2011 to 2018 with CAGR from 2013 to 2018.

This report analyzes various marketing trends and establishes the most effective growth strategy. It identifies market dynamics such as drivers, opportunities, burning issues, and winning imperatives. Major companies such Siemens AG, ABB, Schneider Electric SA, Toshiba, Alstom Grid, Mitsubishi Electric Corporation etc. have also been profiled in this report.

Original Source: http://www.whatech.com/market-research-reports/press-release/it/28355-global-circuit-breaker-fuse-market-grow-at-a-cagr-of-5-2-to-reach-15-100-0-million-by-2018